If you live in Texas, you probably have more trees than most. The dense canopy of leaves and branches can be beautiful to look at, but it’s not always easy to trim them. You want your trees to stay healthy and grow as much as possible—and that means knowing how to trim them properly. I’ll walk you through the steps for how to trim your trees in Texas so they look their best all year long!

1. Trim your tree a little at a time.

Trimming is a lot easier if you do it little by little. You don’t want to trim so much off that your tree looks like a stub and you’ll have to start all over again, but trimming too little won’t make much of an improvement. Start with the top of your tree, and work your way down from there. When you’re at the bottom of your tree, trim just enough so that it’s even with the base of the trunk.
If possible, avoid making cuts on both sides at once because this can cause uneven growth and damage branches under stress from being trimmed too short or growing too long for their position relative to other branches (which might help explain why some trees grow crooked).

2. Pay attention to the weather when trimming your trees in texas.

Trees should be trimmed when their branches are dormant. This means it’s best to trim trees in the winter, when the tree is not leafy, or in early spring before leaves emerge. The latter can be especially tricky because you don’t want to damage newly forming buds.
If you live in Texas and need help with trimming your tree, our arborist will come out and give you an estimate on how much it will cost based on the size of your tree and what kind of shape it’s in. To schedule an appointment with us, complete our online form or call us at 214-253-0363 today!
We are happy to offer free estimates for all of our services including tree removal, stump grinding/excavation, pruning/trimming/shaping (which includes deadwooding), fertilization & mulching as well as other things like hazard assessment & emergency services (such as downed power lines).

3. Make sure to use the right equipment.

While you can use a saw to cut through branches, it is not the best method. Instead, you should use a pole pruner for larger branches and loppers and hand pruners for smaller ones. You can also use hedge clippers or loppers for shrubs if needed.
Pole Pruner: Use this tool when you need to trim high branches that are more than 18 inches from your reach. The pole extends between 13 and 30 feet in length so that you can reach tall branches from the ground without climbing up your tree or ladder. If it seems like too much work to extend the long pole every time you want to trim a branch, consider buying two poles so that one of them is always ready at hand when needed!
Lopper: This tool cuts branches up to 1 inch thick with its sharp blades that open when squeezed together by hand (no electricity required). It works well on both hardwood trees—like oak—and softwood trees such as pine because they both have similar wood structures underneath their bark layers which means they’re just as easy (or difficult!)

4. Keep your eyes open for disease and fungus.

The first step to trimming your trees is to make sure they’re healthy. To do this, you’ll want to look for signs of disease and fungus as well as insects, broken branches, and branches that are too close together. You should also keep an eye out for any sign of parasites or other pests that could be damaging your trees.
If you notice anything unusual while walking around the outside of your home—like dead leaves on one side of a tree compared with another—it’s possible that there is something wrong with the tree’s health.

Trees In Texas

5. Never remove too much of the crown of your tree.

You can remove excess branches to reduce the overall weight of your tree, but never remove more than 10% of its crown at any one time. If you need to trim further, wait at least two years before doing so.
If you are certain that a branch is dead or diseased, it should be removed completely and not simply stubbed off or girdled (the process of cutting around the circumference). As a general rule of thumb, if there’s no sign of new growth on a branch within six months after trimming it back then cut that sucker right off! The same applies if there is any sign of decay on any part of your tree; in fact since most trees have an annual renewal cycle: early spring through late summer/early autumn – removing dead wood in winter will encourage new growth during this period which will help keep up with natural pruning requirements throughout its lifespan.
You should also try not to direct horizontal branches downward if possible because they can get broken off by winds like hurricanes and tornadoes; instead aim them outward so they don’t pose such risks! Likewise avoid angling any branches close enough together that they may rub against each other when strong gusts come along either from above or below (i.e., winds coming from different directions).

6. Swap out your trees for xeriscaping

A great way for Texas homeowners to save water, money and time is by installing xeriscaping. Xeriscaping is a landscaping technique that uses drought-resistant plants that require less maintenance, as well as mulch and gravel to retain soil moisture.
Xeriscaping is perfect for homeowners who want their yards to be easy to maintain and look good year round without the need for frequent watering or constant pruning. By using native plants instead of exotic ones, you can also save money on fertilizer costs because these types of trees don’t need as much attention—and that means one less thing you have to worry about! If you do choose an exotic plant species in your garden design, there are plenty of options out there with minimal maintenance requirements so that they won’t require much upkeep at all—just make sure it doesn’t require regular watering during the hot summer months (which will help keep your utility bills down).

7. Why xeriscaping in Texas is better than trees and annuals

When it comes to landscaping your home, there are several options. Many people choose to have trees and flowers planted in their yards for aesthetic purposes. However, trees and annuals have many disadvantages when compared with xeriscaping—the practice of using native plants from the area to create a harmonious landscape that requires less water, fertilizers, pesticides and other resources.
Xeriscaping has been shown to save money in areas with harsh climates like Texas where there are long periods between rainfalls (as much as six months during some years). In these cases, watering lawns can be particularly expensive; however, homeowners often find that choosing xeriscaping can reduce their monthly water bills by 75 percent or more! This is because native plants do not require as much care or maintenance as non-native varieties: they don’t need mowing or watering throughout most of the year so you’ll spend less time maintaining them than if you’d planted an area full of ferns instead (which require frequent trimming).

8. What plants to pick when you design a xeriscape

When you design a xeriscape, consider these plants that thrive in Texas:
Cacti and succulents are drought tolerant and easy to care for. They also require little water to stay alive.
Use native Texas plants so they can take root more easily in your yard and adapt better to the climate. Native plants come with fewer pests and diseases and use less water than non-native ones do.
Choose low maintenance options like groundcovers, vegetables, herbs, vines, shrubs or trees that will require little attention from you over time so they can grow on their own without needing much help from you at all!

By following these steps and paying attention to your trees, you can keep them looking healthy and beautiful. If you need help with trimming or other tree maintenance services, contact us today for more information about our company and what we offer!

Request a Consultation